Tech Support

Fit and Tolerance

1.Inner ring of rod ends

d	over	–	6	10	18	30	50	80
mm	incl	6	10	18	30	50	80	120
SI..E	SI..ES
SI..ES 2RS
SA..E	SA..ES
SA..ES 2RS
GIR..UK	GAR..UK	0	0	0	0	0	0	0
GIR..UK 2RS		-0.008	-0.008	-0.008	-0.010	-0.012	-0.015	-0.020
GAR..UK 2RS
GK..DO	GF..DO
GIHR..DO
GIHR-K..DO
GIHN-K..LO				+0.018	+0.021	+0.025	+0.030	+0.035
GF..LO				0	0	0	0	0
SI..T/K	SA..T/K	0.012	0.015	0.018	0.021
SI..PK	SA..PK
SSI..T/K	SSA..T/K
PHS..	POS..
CF.. CF..T
CM.. CM..T
JF.. JM..		0.038	0.038	0.038	0.038	0.038
SIZJ..S SAZJ..S		-0.013	-0.013	-0.030	-0.030	-0.030
SIZP..S SAZP..S

2.Centre height deviation of rod ends

d	over	–	6	20	30	45	60
mm	incl	6	20	30	45	60	80
Δhs		0.80	0.80	1.00	1.40	1.80	2.25
Δhs		1.20	-1.20	-1.70	-2.10	-2.70	-3.40

3.Inner ring of spherical plain bearing

d	over	–	6	10	18	30	50	80	120	180	250
mm	incl	6	10	18	30	50	80	120	180	250	315
GE..E		0	0	0
GE..E		-0.008	-0.008	-0.008
GE..ES				0	0	0	0	0	0	0	0
GE..ES				-0.008	-0.010	-0.012	-0.015	-0.02	-0.025	-0.03	-0.035
GE..ES 2RS				0	0	0	0	0	0	0	0
GE..ES 2RS				-0.008	-0.010	-0.012	-0.015	-0.02	-0.025	-0.03	-0.035
GEG..E		0	0
GEG..E		-0.008	-0.008
GEG..ES				0	0	0	0	0	0	0
GEG..ES				-0.008	-0.010	-0.012	-0.015	-0.02	-0.025	-0.03
GEG..ES 2RS				0	0	0	0	0	0	0
GEG..ES 2RS				-0.008	-0.010	-0.012	-0.015	-0.02	-0.025	-0.03
GEEW..ES				0.018	0.021	0.025	0.03	0.035	0.04
GEEW..ES				0	0	0	0	0	0
GEEM..ES 2RS					0.000	0.000	0.000
GEEM..ES 2RS					-0.010	-0.012	-0.015
GEZ..ES				0	0	0	0	0	0
GEGZ..ES				-0.008	-0.010	-0.012	-0.015	-0.02	-0.025
GEZ..ES 2RS				0	0	0	0	0	0
GEGZ..ES 2RS				-0.008	-0.010	-0.012	-0.015	-0.02	-0.025
GAC..S					0	0	0	0	0	0
GAC..S					-0.012	-0.012	-0.015	-0.02	-0.025	-0.03
GX…S		0	0	0	0	0	0	0	0	0
GX…S		-0.008	-0.008	-0.008	-0.010	-0.012	-0.015	-0.02	-0.025	-0.03
GE..C		0	0	0	0	0
GE..C		-0.008	-0.008	-0.008	-0.010	-0.012
GE..ET 2RS				0	0	0	0	0	0	0
GE..ET 2RS				-0.008	-0.010	-0.012	-0.015	-0.02	-0.025	-0.03
GE..FW		0	0	0	0
GE..FW		-0.008	-0.008	-0.008	-0.010
GE..FW 2RS				0	0	0	0	0	0	0
GE..FW 2RS				-0.008	-0.010	-0.012	-0.015	-0.02	-0.025	-0.03
GEBK..S		+0.012	+0.015	+0.018	+0.021	+0.025	+0.030	+0.035
GEBK..S		0	0	0	0	0	0	0
GEBJ..S		+0.012	+0.015	+0.018	+0.021	+0.025	+0.030	+0.035
GEBJ..S		0	0	0	0	0	0	0
COM.. /HCOM		+0.038	+0.038	+0.038	+0.038	+0.038	+0.038
COM.. /HCOM		-0.013	-0.013	-0.013	-0.013	-0.013	-0.013
COM..T /HCOM..T		+0.038	+0.038	+0.038	+0.038	+0.038	+0.038
COM..T /HCOM..T		-0.013	-0.013	-0.013	-0.013	-0.013	-0.013

Inner ring width tolerance

d	over	–	50	80	120	180	250	315
mm	incl	50	80	120	180	250	315	400
ΔBs		0	0	0	0	0	0	0
ΔBs		-0.12	-0.15	-0.20	-0.25	-0.30	-0.35	-0.40

4.Inner ring of spherical plain bearing

d	over	10	18	30	50	60	80	120	150	180	250	315
mm	incl	18	30	50	60	80	120	150	180	250	315	400
GE..E		0	0
GE..E		-0.008	-0.009
GE..ES			0	0	0	0	0	0	0	0	0	0
GE..ES			-0.009	-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03	-0.035	-0.04
GE..ES 2RS				0	0	0	0	0	0	0	0	0
GE..ES 2RS				-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03	-0.035	-0.04
GEG..E		0	0	0
GEG..E		-0.008	-0.009	-0.011
GEG..ES				0	0	0	0	0	0	0	0	0
GEG..ES				-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03	-0.035	-0.04
GEG..ES 2RS				0	0	0	0	0	0	0	0	0
GEG..ES 2RS				-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03	-0.035	-0.04
GEEW..ES				0	0	0	0	0	0	0	0	0
GEEW..ES				-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03	-0.035	-0.04
GEEM..ES 2RS				0	0	0	0	0
GEEM..ES 2RS				-0.011	-0.013	-0.013	-0.015	-0.018
GEZ..ES			0	0	0	0	0	0	0	0
GEGZ..ES			-0.009	-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03
GEZ..ES 2RS				0	0	0	0	0
GEGZ..ES 2RS				-0.011	-0.013	-0.013	-0.015	-0.018
GAC..S				0	0	0	0	0	0	0	0	0
GAC..S				-0.014	-0.016	-0.016	-0.018	-0.02	-0.025	-0.03	-0.035	-0.04
GX…S			0	0	0	0	0	0	0	0	0
GX…S			-0.009	-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03	-0.035
GE..C		0	0	0
GE..C		-0.008	-0.009	-0.011
GE..ET 2RS			0	0	0	0	0	0	0	0	0	0
GE..ET 2RS			-0.009	-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03	-0.035	-0.04
GE..FW		0	0	0	0
GE..FW		-0.008	-0.009	-0.011	-0.013
GE..FW 2RS			0	0	0	0	0	0	0	0	0	0
GE..FW 2RS			-0.009	-0.011	-0.013	-0.013	-0.015	-0.018	-0.025	-0.03	-0.035	-0.04
GEBK..S		0	0	0	0
GEBK..S		-0.011	-0.013	-0.016	-0.019
GEBJ..S		0	0	0	0
GEBJ..S		-0.011	-0.013	-0.016	-0.019
COM.. /HCOM		0	0	0	0	0	0	0	0
COM.. /HCOM		-0.018	-0.018	-0.018	-0.018	-0.018	-0.018	-0.018	-0.018
COM..T /HCOM..T		0	0	0	0	0	0	0	0
COM..T /HCOM..T		-0.018	-0.018	-0.018	-0.018	-0.018	-0.018	-0.018	-0.018

Outer ring width tolerance

d	over	–	50	80	120	180	250	315
mm	incl	50	80	120	180	250	315	400
ΔCs		0	0	0	0	0	0	0
ΔCs		-0.24	-0.30	-0.40	-0.50	-0.60	-0.70	-0.80

FEATURED PRODUCTS

SERVICE

CONTACT

Unit 806, No.9, Jiefang South Road, Ningbo 315010, China

Tel: +86-574-87676065

Fax: +86-574-87675899

Email: fusco@fuscoinc.com

Skype: fusco.fsk

Whatsapp: +86-13586528620

Copyright © 2018-2024 Fusco Industry Co., Ltd. All Right Resrrved sitemap